Home Titanium-Nitride-Coating Grade E
Description | Application | Storage | Safety advices | technical Data

Ceramic components placed on TiN-coating high temperature parting agent 
for coating ceramics and graphite 
for sintering hard metal powders 
stable against reactive metallic melts 
quick drying formulation 
Oben Description

Titanium-Nitride-Coating Grade E  is a special coating based on high purity titanium nitride (>99% TiN). This coating can be very well used as a parting agent when sintering hard metal powders on graphite supports and trays. Also Titanium-Nitride-Coating Grade E shows a good stability against reactive metal melts lilke nickel, cobald and chrome as well as copper. Titanium-Nitride-Coating Grade E can be used to coat graphite and ceramics. After the application on graphite a hard and abrasive-resistant titanium carbide layer can be produced with Titanium-Nitride-Coating Grade E by thermal treatment. Titanium-Nitride-Coating Grade E can be used at air to 500°C, under vacuum and inert gas atmosphere to 1500°C.


Resuspend or shake Titanium-Nitride-Coating Grade E prior to use. This product may be diluted with ethanol if necessary. 
Application on clean surfaces is possible by brushing or spraying. After drying further layers can be applied. 
A thin coating application (50-150µm) is favourable. A thick coat may crack and chip off.

ObenStorage-Container Size
Keep container tightly closed and store product in a well ventilated and cool place. Titanium-Nitride-Coating Grade E is available in containers of 1kg.

ObenSafety Advices

Titanium-Nitride-Coating Grade E contains ethanol (ethyl alcohol) and is labelled highly flammable. Use in well ventilated areas only. An EC material safety data sheet is available.

ObenTechnical Data

Colour brown
Ceramic constituent Titanium nitride (TiN)
Vehicle Ethanol (ethyl alkohol)
Solid content (Titanium nitride) 25%
Density (g/cm3) 0.86
Application temperature (max.)  500°C ( 932°F) (at air)
  1500°C (2732°F) (under inert gas or vacuum)

This page in German - Diese Seite in Deutsch
© 2004 Büro für angewandte Mineralogie · Dr. Stephan Rudolph · D-47918 Tönisvorst
These recommendations are believed to be correct. However, no guarantee of their accuracy is given. Therefore, purchasers shall make their own tests to determine suitability for their use. These products are offered for industrial and related uses (e.g. research and development) only. However the user must take the necessary precautions appropriate for products containing chemicals. This description does not imply the absence of any patents, the responsibility whatsoever solely rests with the user.